DIAMOND RESCUE CHAINSAWS


DIAMOND RESCUE CHAINSAWS

The gas powered Univent Diamond Chainsaw has a unique cutting depth, allowing you to cut 15.35” from one side. It can also make openings as small as .43” X .43”, which makes it perfect for irregularly shaped openings. Ideal for cutting minor adjustments to window and door openings, when you don't want to over-cut the corner.

DIAMOND RESCUE CHAINSAWS

The gas powered Univent Diamond Chainsaw has a unique cutting depth, allowing you to cut 15.35” from one side. It can also make openings as small as .43” X .43”, which makes it perfect for irregularly shaped openings. Ideal for cutting minor adjustments to window and door openings, when you don't want to over-cut the corner.

DIAMOND RESCUE CHAINSAWS

The gas powered Univent Diamond Chainsaw has a unique cutting depth, allowing you to cut 15.35” from one side. It can also make openings as small as .43” X .43”, which makes it perfect for irregularly shaped openings. Ideal for cutting minor adjustments to window and door openings, when you don't want to over-cut the corner.

DIAMOND CHAINSAW FEATURES

RAM JET, FORCED AIR INJECTION
The specially designed flywheel removes 97% of debris from the air with centrifugal force and provides 35% more airflow around the engine than standard flywheels. The clean air is channeled to the carburetor housing, pressurizing it through force injection. The end result is higher performance, better air filtration, and a longer lasting and cooler running saw.

TWO MASS SYSTEM
Ergonomically designed handles with, optimum spacing and an anti-vibration system minimize fatigue and provide an unsurpassed operator experience. The two-mass system isolates the saw's handles from the engine and cutting arm with steel springs, minimizing vibration transferred back to the operator. The weight of the saw is balanced evenly between the two handles.

WATER INJECTED BAR
Specialized bar provides water injection to the bearings inside. This provides lubrication, cooling, and cleaning to prevent slurry and friction from damaging the bearings, resulting in longer life of the guide bar while preventing premature chain stretch.

ET SERIES ENGINE (EXTREME TORQUE)
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.

MOLYTECH CYLINDER HEAD
Molybdenum impregnated and hardened aluminum/magnesium cylinder head with drop forged 74cc piston and moly-rings increases compression, reduces heat, and extends engine life. Allows the engine to run fuel with up to 15% alcohol content. This allows optimum performance from standard 87 to 92 octane fuels. Alcohol is added to standard fuel in order to meet emission standards set by the EPA and other city or state ordinances.

HYPER-VOLT: ELECTRONIC IGNITION
The smart brain of the Hyper-Volt electronic ignition senses when the saw is under load and advances the voltage to maintain higher performance through the cut.

SUPERIOR AIR FILTRATION TECHNOLOGY
The ventilation series saws combine the Ram Jet, Forced Air Injection System with a pure foam air filter, allowing 300% more airflow for heavy smoke and low oxygen environments. A pure foam air filter will not plug up in heavy smoke like paper or nylon filters.

EASY-START COMPRESSION RELIEF VALVE
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.

VORTEC-EXCELERATOR CARBURETOR
All position Vortec-Excelerator Carburetor with ported and polished dual charged transfer ports and Vortec-Excelerator chambers. The built in auto-filter compensating system provides extreme power and engine acceleration with low emissions and excellent fuel economy. This specialty unit is mounted using a vibration-dampening system that is designed to prevent vapor locking in extreme heat situations.

RAM JET, FORCED AIR INJECTION
The specially designed flywheel removes 97% of debris from the air with centrifugal force and provides 35% more airflow around the engine than standard flywheels. The clean air is channeled to the carburetor housing, pressurizing it through force injection. The end result is higher performance, better air filtration, and a longer lasting and cooler running saw.

TWO MASS SYSTEM
Ergonomically designed handles with, optimum spacing and an anti-vibration system minimize fatigue and provide an unsurpassed operator experience. The two-mass system isolates the saw's handles from the engine and cutting arm with steel springs, minimizing vibration transferred back to the operator. The weight of the saw is balanced evenly between the two handles.

WATER INJECTED BAR
Specialized bar provides water injection to the bearings inside. This provides lubrication, cooling, and cleaning to prevent slurry and friction from damaging the bearings, resulting in longer life of the guide bar while preventing premature chain stretch.

ET SERIES ENGINE (EXTREME TORQUE)
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.

MOLYTECH CYLINDER HEAD
Molybdenum impregnated and hardened aluminum/magnesium cylinder head with drop forged 74cc piston and moly-rings increases compression, reduces heat, and extends engine life. Allows the engine to run fuel with up to 15% alcohol content. This allows optimum performance from standard 87 to 92 octane fuels. Alcohol is added to standard fuel in order to meet emission standards set by the EPA and other city or state ordinances.

HYPER-VOLT: ELECTRONIC IGNITION
The smart brain of the Hyper-Volt electronic ignition senses when the saw is under load and advances the voltage to maintain higher performance through the cut.

SUPERIOR AIR FILTRATION TECHNOLOGY
The ventilation series saws combine the Ram Jet, Forced Air Injection System with a pure foam air filter, allowing 300% more airflow for heavy smoke and low oxygen environments. A pure foam air filter will not plug up in heavy smoke like paper or nylon filters.

EASY-START COMPRESSION RELIEF VALVE
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.

VORTEC-EXCELERATOR CARBURETOR
All position Vortec-Excelerator Carburetor with ported and polished dual charged transfer ports and Vortec-Excelerator chambers. The built in auto-filter compensating system provides extreme power and engine acceleration with low emissions and excellent fuel economy. This specialty unit is mounted using a vibration-dampening system that is designed to prevent vapor locking in extreme heat situations.

RAM JET, FORCED AIR INJECTION
The specially designed flywheel removes 97% of debris from the air with centrifugal force and provides 35% more airflow around the engine than standard flywheels. The clean air is channeled to the carburetor housing, pressurizing it through force injection. The end result is higher performance, better air filtration, and a longer lasting and cooler running saw.

TWO MASS SYSTEM
Ergonomically designed handles with, optimum spacing and an anti-vibration system minimize fatigue and provide an unsurpassed operator experience. The two-mass system isolates the saw's handles from the engine and cutting arm with steel springs, minimizing vibration transferred back to the operator. The weight of the saw is balanced evenly between the two handles.

WATER INJECTED BAR
Specialized bar provides water injection to the bearings inside. This provides lubrication, cooling, and cleaning to prevent slurry and friction from damaging the bearings, resulting in longer life of the guide bar while preventing premature chain stretch.

ET SERIES ENGINE (EXTREME TORQUE)
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.

MOLYTECH CYLINDER HEAD
Molybdenum impregnated and hardened aluminum/magnesium cylinder head with drop forged 74cc piston and moly-rings increases compression, reduces heat, and extends engine life. Allows the engine to run fuel with up to 15% alcohol content. This allows optimum performance from standard 87 to 92 octane fuels. Alcohol is added to standard fuel in order to meet emission standards set by the EPA and other city or state ordinances.

HYPER-VOLT: ELECTRONIC IGNITION
The smart brain of the Hyper-Volt electronic ignition senses when the saw is under load and advances the voltage to maintain higher performance through the cut.

SUPERIOR AIR FILTRATION TECHNOLOGY
The ventilation series saws combine the Ram Jet, Forced Air Injection System with a pure foam air filter, allowing 300% more airflow for heavy smoke and low oxygen environments. A pure foam air filter will not plug up in heavy smoke like paper or nylon filters.

EASY-START COMPRESSION RELIEF VALVE
High performance engine reduces fuel consumption up to 20% and emissions up to 60%. The saw produces up to 20% more horsepower than stock increasing torque over a wider RPM range when ventilating a roof or cutting/felling trees. The ET Series gives more power throughout the cut.

VORTEC-EXCELERATOR CARBURETOR
All position Vortec-Excelerator Carburetor with ported and polished dual charged transfer ports and Vortec-Excelerator chambers. The built in auto-filter compensating system provides extreme power and engine acceleration with low emissions and excellent fuel economy. This specialty unit is mounted using a vibration-dampening system that is designed to prevent vapor locking in extreme heat situations.

DIAMOND RESCUE CHAINSAW MODELS

MODEL # HP CC RPM CUTTING DEPTH WEIGHT LIST PRICE PURCHASE

UF-ICS12-680

5.7

80

12,000

12 inch

21 lbs.

$2,410.00

UF-ICS14-680

5.7

80

12,000

14 inch

21 lbs.

$2,974.00

UF-ICS14-633

6.5

101

11,500

14 inch

27.5 lbs

$3,176.00

UF-ICS16-633

6.5

101

11,500

16 inch

27.5 lbs

$3,665.00

ADDITIONAL INFORMATION

MODEL # DESCRIPTION LIST PRICE PURCHASE

C-26PAC/1

2 Cycle Oil, 6 pack, 2.6 oz. Bottles

$15.68

FC

1 Gallon Fuel Can

$21.28

  • Versatile and easy to use.
  • Deep cuts up to 16 inches deep.
  • Square corners without over-cuts.
  • Starter designed for concrete-cutting environments.
  • Safe to operate, no "kickback".
  • Wet-cut, no hazardous dust or debris.
  • Cuts irregular shapes.
  • ICS-12 will work with standard "garden hose" water pressure.
  • ICS-14 and ICS-16 feature new slurry channel feature eliminating starter clogging, vibration isolation, and a more durable crankcase than previous models.