POSITIVE PRESSURE VENTILATION (PPV) FANS
The electric series positive pressure ventilation (PPV) fans come standard in the DS series frame but are available in the DST series frame as well as the Du-All frame. The Du-All frame allows the electric Positive pressure ventilation fan to point straight down into a manhole or up into an attic and any position in between.
ELECTRIC POSITIVE PRESSURE VENTILATION FANS
POSITIVE PRESSURE VENTILATION (PPV) FANS
The DST series positive pressure ventilation (PPV) fans feature large flatproof pneumatic style wheels and tires, 35" extendable handle, high performance Honda motors, stainless steel frames, tiltable from -10° to +20° and are stand alone operational. The DST series fans are the most powerful compact positive pressure ventilator (PPV) fans and blowers available. Most models fit standard compartments and are lightweight for easy handling
STAND ALONE OPERATION
Unifire positive pressure ventilation (PPV) fans and blowers are vibration free for standalone operation. They will not move on wet or slick surfaces. This is accomplished through balanced weight distribution and many other factors that help eliminate vibration.
OPEN SHROUD DESIGN
The open shroud design allows for 20% more air flow and allows for better channeling of air. There is also faster sealing and greater thrust through the air cone because the air is pulled from the back, sides and tips of the unitron blade.
SHATTER PROOF UNITRON BLADE
100% shatterproof high heat thermal plastic. Made of synthetic nylon, reinforced with carbon fibers. Impact and stress resistant with the best thermal expansion and contraction available.
35" EXTENDABLE HANDLE
The ergonomically designed handle quickly extends to 35" and can be operated with one hand, making transportation easier. Available in DST and DU-ALL frames only.
PATENTED FRICTION-LOCK TILT LEVER
The friction-lock tilt lever allows for fast and easy adjustment to any angle from -10° to +20°. This enables the operator to pinpoint airflow and create the prefect seal.
HIGH PERFORMANCE HONDA MOTORS
All the features you expect from Honda; electronic ignition, oil alert system, dual element air filtration system, and electronic ignition for easy starting.
DIRECT DRIVE
All Unifire positive pressure ventilation (PPV) blowers feature a direct drive design. By being direct drive we essentially gain 20% power transfer from the motor to the blade over belt driven models.
STAINLESS STEEL WRAP AROUND FRAME
Lightweight yet strong stainless steel frame provides 360° roll protection. The low arc design evenly distributes weight to all four legs and feet for vibration free operation.
RUBBER FEET
Rubber feet aid the elimination of movement due to vibration.
**Four rubber feet on DS frames and two on DST and DU-ALL frames.
DST SERIES
POSITIVE PRESSURE VENTILATION (PPV) FANS
The DST series positive pressure ventilation (PPV) fans feature large flatproof pneumatic style wheels and tires, 35" extendable handle, high performance Honda motors, stainless steel frames, tiltable from -10° to +20° and are stand alone operational. The DST series fans are the most powerful compact positive pressure ventilator (PPV) fans and blowers available. Most models fit standard compartments and are lightweight for easy handling
STAND ALONE OPERATION
Unifire positive pressure ventilation (PPV) fans and blowers are vibration free for standalone operation. They will not move on wet or slick surfaces. This is accomplished through balanced weight distribution and many other factors that help eliminate vibration.
OPEN SHROUD DESIGN
The open shroud design allows for 20% more air flow and allows for better channeling of air. There is also faster sealing and greater thrust through the air cone because the air is pulled from the back, sides and tips of the unitron blade.
SHATTER PROOF UNITRON BLADE
100% shatterproof high heat thermal plastic. Made of synthetic nylon, reinforced with carbon fibers. Impact and stress resistant with the best thermal expansion and contraction available.
PATENTED FRICTION-LOCK TILT LEVER
The friction-lock tilt lever allows for fast and easy adjustment to any angle from -10° to +20°. This enables the operator to pinpoint airflow and create the prefect seal.
HIGH PERFORMANCE ELECTRIC MOTORS
All the features you expect from Honda; electronic ignition, oil alert system, dual element air filtration system, and electronic ignition for easy starting.
DIRECT DRIVE
All Unifire positive pressure ventilation (PPV) blowers feature a direct drive design. By being direct drive we essentially gain 20% power transfer from the motor to the blade over belt driven models.
STAINLESS STEEL WRAP AROUND FRAME
Lightweight yet strong stainless steel frame provides 360° roll protection. The low arc design evenly distributes weight to all four legs and feet for vibration free operation.
RUBBER FEET
Rubber feet aid the elimination of movement due to vibration.
**Four rubber feet on DS frames and two on DST and DU-ALL frames.
Available Du-All Frame Upgrade for Electric PPV Fans
Available DST Frame Upgrade for Electric PPV Fans
(Photo shows frame with Gas model)
STAND ALONE OPERATION
Unifire positive pressure ventilation (PPV) fans and blowers are vibration free for standalone operation. They will not move on wet or slick surfaces. This is accomplished through balanced weight distribution and many other factors that help eliminate vibration.
OPEN SHROUD DESIGN
The open shroud design allows for 20% more air flow and allows for better channeling of air. There is also faster sealing and greater thrust through the air cone because the air is pulled from the back, sides and tips of the unitron blade.
SHATTER PROOF UNITRON BLADE
100% shatterproof high heat thermal plastic. Made of synthetic nylon, reinforced with carbon fibers. Impact and stress resistant with the best thermal expansion and contraction available.
35" EXTENDABLE HANDLE
The ergonomically designed handle quickly extends to 35" and can be operated with one hand, making transportation easier. Available in DST and DU-ALL frames only.
PATENTED FRICTION-LOCK TILT LEVER
The friction-lock tilt lever allows for fast and easy adjustment to any angle from -10° to +20°. This enables the operator to pinpoint airflow and create the prefect seal.
HIGH PERFORMANCE HONDA MOTORS
All the features you expect from Honda; electronic ignition, oil alert system, dual element air filtration system, and electronic ignition for easy starting.
DIRECT DRIVE
All Unifire positive pressure ventilation (PPV) blowers feature a direct drive design. By being direct drive we essentially gain 20% power transfer from the motor to the blade over belt driven models.
STAINLESS STEEL WRAP AROUND FRAME
Lightweight yet strong stainless steel frame provides 360° roll protection. The low arc design evenly distributes weight to all four legs and feet for vibration free operation.
RUBBER FEET
Rubber feet aid the elimination of movement due to vibration.
**Four rubber feet on DS frames and two on DST and DU-ALL frames.
| MODEL # | CFM | CONTROL TYPE | DIMENSIONS | PROPELLER | WEIGHT | LIST PRICE | |
|
E18SP |
12,000 |
On/Off |
21" X 21" X 18" (H x W x D) |
18" / 2 Blade |
85 lbs. |
$2,264.71 |
|
|
E18P4 |
22,000 |
On/Off |
23" X 23" X 19" (H x W x D) |
18" / 4 Blade |
88 lbs. |
$2395.69 |
|
|
EB18SP* |
12,000 |
Variable Speed |
21" X 23" X 19" (H x W x D) |
18" / 2 Blade |
90 lbs. |
$3,249.42 |
|
|
EX18SP** |
12,000 |
On/Off Explosion Proof |
23" X 23" X 19" (H x W x D) |
18" / 2 Blade |
110 lbs. |
$4,923.54 |
|
NOTES:
*Variable Speed Control
**Explosion Proof Model
Prices above are for DS Series Frames without Wheels and Handle. $100 add-on for DST or $200 for Du-All frame upgrades.
ENGINE:
• Electronic ignition w/ lifetime warranty.
• Dual element air cleaner.
• Auto oil alert.
• Decompression.
• Factory 2 year warranty.
PROPELLER:
• Built-in one-piece hub.
• Unitron composite.
• Carbon reinforced.
• Impact resistant.
• 100% shatterproof.
• Limited lifetime warranty.
SHROUD:
• Complete shroud is OSHA approved.
• 2 piece open shroud design.
• Vinyl Coated.
• 3/16" diameter outside wrap.
• 1/4" diameter inside supports.
• Easily remove front shroud without special tools.
DRIVE TYPE:
• Direct drive, approved by engine manufacturer.
TILT POSITION:
• Infinite positions between -10° to +20°.
• Spring loaded friction lock with splined inner-locking gear.
• Rotating handle for ease of use.
• Zinc plated friction lock tilting lever.
• Adjustable friction between upper and lower frames.
SEAL DISTANCE:
•ﾠ Seals a standard doorway from 4 - 8 feet.
SUSPENSION:
• Arc design with integral suspension.
• Balanced & matched rubber feet.
ENGINE PROTECTION:
• 360° roll protection.
• Upper frame offers overhead engine protection.
WARRANTY:
• Propeller: Limited lifetime warranty.
• Frame: 5 year warranty on frame.
• Engine: 2 year factory.
FRAME:
• Upper Frame made with 3/4" 304-S stainless steel, .065 gauge.
• Lower Frame made with 1" 304-S stainless steel, .065 gauge.
• Arc Angles.
• 50° - Front legs.
• 20° - Back legs.
• Chemical and rust resistant.
• Grade 5 or better hardware.
• Oil impregnated bushings on pivots.
• 5 year warranty.
OBSTACLE CLEARANCE:
• Lower frame offers 6.75" clearance on sides.
• Lower frame offers 5" clearance on back.
OPTIONS:
• Patented water misting system.
• Hold down brackets.
| MODEL # | DESCRIPTION | LIST PRICE | MODEL # | DESCRIPTION | LIST PRICE | |||
|
K-H2O |
Watermist Kit (You Install) |
$441.00 |
|
EMN |
Engine Mount Nut |
$0.55 |
|
|
|
F-H2O |
Watermist Kit (Factory install) |
$497.00 |
|
EMW |
Engine Mount Washer |
$0.55 |
|
|
|
H2O-R |
Watermist Ring |
$273.00 |
|
FB |
Frame Bolt |
$1.60 |
|
|
|
WPC |
Water Proof Fan Cover |
$177.00 |
|
FN |
Frame Nut |
$0.65 |
|
|
|
WL |
Pneumatic Wheels (Black) |
$165.00 |
|
FW |
Frame Washer |
$0.55 |
|
|
|
WHL-GRAY |
Gray Wheel Kit |
$144.00 |
|
F-UG |
Frame Upgrade |
$1,378.00 |
|
|
|
HNDL |
T-Handle Assembly |
$187.00 |
|
F-UG-DST |
Frame Upgrade DST Models |
$1,600.00 |
|
|
|
UF20-15 |
20" X 15' Vinyl Polyester Ducting |
$607.00 |
|
FLA |
Friction Lock Assembly |
$138.00 |
|
|
|
UF20-25 |
20" X 25' Vinyl Polyester Ducting |
$783.00 |
|
FLW |
Friction Lock Washer |
$1.60 |
|
|
|
FS20 |
20" Full Shroud |
$243.00 |
|
FSW |
Friction Shroud Washer |
$0.55 |
|
|
|
U-18SP |
18" Unitron 2-Blade Blade Prop |
$387.00 |
|
K |
Knob (Black), For Tilt Adjustment |
$7.50 |
|
|
|
U-18P4 |
18" Unitron 4-Blade Blade Prop |
$551.00 |
|
LF |
Lower Frame |
$304.00 |
|
|
|
BSB |
Back Shroud Bolt |
$1.60 |
|
UF |
Upper Frame |
$1,020.00 |
|
|
|
RETRO |
Retro Kit |
$34.00 |
|
UW |
Urethane Washer (Red) |
$1.50 |
|
|
|
BSW |
Back Shroud Washer |
$0.55 |
|
MB |
Mounting Bracket |
$99.00 |
|
|
|
CBN |
Crankshaft Bolt |
$3.15 |
|
NS |
Nutsert |
$2.50 |
|
|
|
CW |
Crankshaft Washer |
$0.55 |
|
OIB |
Oil Impregnated Bushing |
$5.25 |
|
|
|
EMB |
Engine Mount Bolt |
$2.65 |
|
POP PIN |
Pop Pin for Adjustable Handle |
$12.15 |
|
|
|
PT |
Protective Tape (For use with wood props) |
$7.50 |
|
PB |
Prop Bolt |
$2.50 |
|
|
|
RFS |
Rubber Feet Soft (For fans up to 6.5 HP) |
$14.16 |
|
PN |
Prop Nut |
$0.55 |
|
|
|
SWN |
Shroud Wing Nut |
$2.50 |
|
SK |
Shear Key |
$2.50 |
|
|
|
SS |
Set Screw |
$0.55 |
|
| MODEL # | DESCRIPTION | LIST PRICE | PURCHASE |
|
K-H2O |
Watermist Kit (You Install) |
$441.00 |
|
|
F-H2O |
Watermist Kit (Factory install) |
$497.00 |
|
|
H2O-R |
Watermist Ring |
$273.00 |
|
|
WPC |
Water Proof Fan Cover |
$177.00 |
|
|
WL |
Pneumatic Wheels (Black) |
$165.00 |
|
|
WHL-GRAY |
Gray Wheel Kit |
$144.00 |
|
|
HNDL |
T-Handle Assembly |
$187.00 |
|
|
UF20-15 |
20" X 15' Vinyl Polyester Ducting |
$607.00 |
|
|
UF20-25 |
20" X 25' Vinyl Polyester Ducting |
$783.00 |
|
|
UF22-15 |
22" X 15' Vinyl Polyester Ducting |
$607.00 |
|
|
UF22-25 |
22" X 25' Vinyl Polyester Ducting |
$783.00 |
|
|
FS20 |
20" Full Shroud |
$243.00 |
|
|
FS22 |
22" Full Shroud |
$254.00 |
|
|
FS26 |
26" Full Shroud |
$275.00 |
|
|
FS32 |
32" Full Shroud |
$277.00 |
|
|
U-18SP |
18" Unitron 2-Blade Blade Prop |
$387.00 |
|
|
U-20SP |
20" Unitron 2-Blade Blade Prop |
$387.00 |
|
|
U-22SP |
22" Unitron 2-Blade Blade Prop |
$595.00 |
|
|
U-18P4 |
18" Unitron 4-Blade Blade Prop |
$551.00 |
|
|
U-20P4 |
20" Unitron 4-Blade Blade Prop |
$579.00 |
|
|
U-22P4 |
22" Unitron 4-Blade Blade Prop |
$606.00 |
|
|
RETRO |
Retro Kit |
$34.00 |
|
|
EXH-2 |
Deluxe Exhaust Kit, 2" X 9' |
$221.00 |
|
|
EXH-3 |
Low Emissions/Clean Air Muffler Conversion |
$750.00 |
|
|
BSB |
Back Shroud Bolt |
$1.60 |
|
|
BSW |
Back Shroud Washer |
$0.55 |
|
|
CBN |
Crankshaft Bolt |
$3.15 |
|
|
CW |
Crankshaft Washer |
$0.55 |
|
|
EMB |
Engine Mount Bolt |
$2.65 |
|
|
EMN |
Engine Mount Nut |
$0.55 |
|
|
EMW |
Engine Mount Washer |
$0.55 |
|
|
FB |
Frame Bolt |
$1.60 |
|
|
FN |
Frame Nut |
$0.65 |
|
|
FW |
Frame Washer |
$0.55 |
|
|
F-UG |
Frame Upgrade |
$1,378.00 |
|
|
F-UG-DST |
Frame Upgrade DST Models |
$1,600.00 |
|
|
FLA |
Friction Lock Assembly |
$138.00 |
|
|
FLW |
Friction Lock Washer |
$1.60 |
|
|
FSW |
Friction Shroud Washer |
$0.55 |
|
|
K |
Knob (Black), For Tilt Adjustment |
$7.50 |
|
|
MG |
Muffler Guard |
$66.00 |
|
|
HAF5 |
Honda Air Filter |
$34.00 |
|
|
HD |
Honda Dipstick |
$12.00 |
|
|
GAS CAP |
Honda Gas Cap |
$7.00 |
|
|
LF |
Lower Frame |
$304.00 |
|
|
UF |
Upper Frame |
$1,020.00 |
|
|
UW |
Urethane Washer (Red) |
$1.50 |
|
|
MB |
Mounting Bracket |
$99.00 |
|
|
NS |
Nutsert |
$2.50 |
|
|
OIB |
Oil Impregnated Bushing |
$5.25 |
|
|
POP PIN |
Pop Pin for Adjustable Handle |
$12.15 |
|
|
PB |
Prop Bolt |
$2.50 |
|
|
PN |
Prop Nut |
$0.55 |
|
|
PT |
Protective Tape (For use with wood props) |
$7.50 |
|
|
RFS |
Rubber Feet Soft (For fans up to 6.5 HP) |
$14.16 |
|
|
RFH |
Rubber Feet Hard (For fans up to 8+ HP |
$14.16 |
|
|
SS |
Set Screw |
$0.55 |
|
|
SK |
Shear Key |
$2.50 |
|
|
SWN |
Shroud Wing Nut |
$2.50 |
|
