POSITIVE PRESSURE VENTILATION (PPV) FANS
The DS Series Positive Pressure Ventilation (PPV) Fans feature high performance Honda motors, stainless steel frames, are tiltable from -10° to +20°, and have stand-alone operability.
DS SERIES POSITIVE PRESSURE VENTILATION FANS
DS SERIES
DS SERIES
POSITIVE PRESSURE VENTILATION (PPV) FANS
The DS Series Positive Pressure Ventilation (PPV) Fans feature high performance Honda motors, stainless steel frames, are tiltable from -10° to +20°, and have stand-alone operability.
DS SERIES
POSITIVE PRESSURE VENTILATION (PPV) FANS
The DS Series Positive Pressure Ventilation (PPV) Fans feature high performance Honda motors, stainless steel frames, are tiltable from -10° to +20°, and have stand-alone operability.
DS SERIES FEATURES
DS SERIES FEATURES
STAND-ALONE OPERATION
Unifire Positive Pressure Ventilation (PPV) Fans and Blowers are standalone operational. They will not move on wet or slick surfaces. This is accomplished through balanced weight distribution and many other factors that help eliminate vibration where the fan meets the ground.
OPEN SHROUD DESIGN
The open shroud design allows for 20% more air flow and better channeling of air. Faster sealing and greater thrust is produced through the air cone since the air is pulled from the back, sides and tips of the Unitron Blade.
SHATTER-PROOF UNITRON BLADE
100% shatterproof high-heat Unitron thermal composite. Impact and stress resistant with the best thermal expansion and contraction available.
RUBBER FEET
Rubber feet aid the elimination of movement due to vibration.
**Four rubber feet on DS frames and two on DST and DU-ALL frames.
STAINLESS STEEL WRAP AROUND FRAME
Lightweight yet strong stainless steel frame provides 360° roll protection. The low arc design evenly distributes weight to all four legs and feet for vibration free operation.
HIGH PERFORMANCE HONDA MOTORS
All the features you expect from Honda; electronic ignition, oil alert system, dual element air filtration system, and electronic ignition for easy starting.
DIRECT DRIVE
All Unifire Positive Pressure Ventilation (PPV) fans and blowers feature a direct drive propellers. By being direct drive, 20% more power is transferred from the motor to the propeller over belt driven models.
PATENTED FRICTION-LOCK TILT LEVER
The friction-lock tilt lever allows for fast and easy adjustment to any angle between -10° and +20°. This enables the operator to pinpoint airflow and create the perfect seal.
STAND-ALONE OPERATION
Unifire Positive Pressure Ventilation (PPV) Fans and Blowers are standalone operational. They will not move on wet or slick surfaces. This is accomplished through balanced weight distribution and many other factors that help eliminate vibration where the fan meets the ground.
OPEN SHROUD DESIGN
The open shroud design allows for 20% more air flow and better channeling of air. Faster sealing and greater thrust is produced through the air cone since the air is pulled from the back, sides and tips of the Unitron Blade.
SHATTER-PROOF UNITRON BLADE
100% shatterproof high-heat Unitron thermal composite. Impact and stress resistant with the best thermal expansion and contraction available.
RUBBER FEET
Rubber feet aid the elimination of movement due to vibration.
**Four rubber feet on DS frames and two on DST and DU-ALL frames.
STAINLESS STEEL WRAP AROUND FRAME
Lightweight yet strong stainless steel frame provides 360° roll protection. The low arc design evenly distributes weight to all four legs and feet for vibration free operation.
HIGH PERFORMANCE HONDA MOTORS
All the features you expect from Honda; electronic ignition, oil alert system, dual element air filtration system, and electronic ignition for easy starting.
DIRECT DRIVE
All Unifire Positive Pressure Ventilation (PPV) fans and blowers feature a direct drive propellers. By being direct drive, 20% more power is transferred from the motor to the propeller over belt driven models.
PATENTED FRICTION-LOCK TILT LEVER
The friction-lock tilt lever allows for fast and easy adjustment to any angle between -10° and +20°. This enables the operator to pinpoint airflow and create the perfect seal.
DS SERIES FEATURES
STAND-ALONE OPERATION
Unifire Positive Pressure Ventilation (PPV) Fans and Blowers are standalone operational. They will not move on wet or slick surfaces. This is accomplished through balanced weight distribution and many other factors that help eliminate vibration where the fan meets the ground.
OPEN SHROUD DESIGN
The open shroud design allows for 20% more air flow and better channeling of air. Faster sealing and greater thrust is produced through the air cone since the air is pulled from the back, sides and tips of the Unitron Blade.
SHATTER-PROOF UNITRON BLADE
100% shatterproof high-heat Unitron thermal composite. Impact and stress resistant with the best thermal expansion and contraction available.
RUBBER FEET
Rubber feet aid the elimination of movement due to vibration.
**Four rubber feet on DS frames and two on DST and DU-ALL frames.
STAINLESS STEEL WRAP AROUND FRAME
Lightweight yet strong stainless steel frame provides 360° roll protection. The low arc design evenly distributes weight to all four legs and feet for vibration free operation.
HIGH PERFORMANCE HONDA MOTORS
All the features you expect from Honda; electronic ignition, oil alert system, dual element air filtration system, and electronic ignition for easy starting.
DIRECT DRIVE
All Unifire Positive Pressure Ventilation (PPV) fans and blowers feature a direct drive propellers. By being direct drive, 20% more power is transferred from the motor to the propeller over belt driven models.
PATENTED FRICTION-LOCK TILT LEVER
The friction-lock tilt lever allows for fast and easy adjustment to any angle between -10° and +20°. This enables the operator to pinpoint airflow and create the perfect seal.
DS MODEL FANS SPECIFICATIONS
DS MODEL FANS' SPECIFICATIONS
| MODEL # | CFM | ENGINE | DIMENSIONS | PROPELLER | WEIGHT | LIST PRICE | PURCHASE |
|
DS-3 |
8,000 |
Honda GX 120, 118cc (7.2 cu in) |
21.5" X 20" X 17" H X W X D |
18" / 2 Blade |
53 lbs. |
$2,152.70 |
|
|
DS-3P4 |
14,885 |
Honda GX 160, 163 CC (9.9 cu in) |
23" X 23" X 21.5" H X W X D |
18" / 4 Blade |
81 lbs. |
$2,375.45 |
|
|
DS-3P4-L** |
14,885 |
Honda GX 160, 163 CC (9.9 cu. in.) |
23" X 23" X 21.5" H X W X D |
18" / 4 Blade |
85 lbs. |
$2,993.42 |
|
|
DS-9P4 |
17,500 |
Honda GX 270, 270 CC (16.5 cu in) |
25" X 24.5" X 23.5" H X W X D |
20" / 4 Blade |
111 lbs. |
$3,038.67 |
|
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
-
STANDARD DS SPECIFICATIONS
-
ACCESSORIES
ENGINE:
• Electronic ignition w/ lifetime warranty.
• Dual element air cleaner.
• Auto oil alert.
• Decompression.
• Factory 2 year warranty.
PROPELLER:
• Built-in one-piece hub.
• Unitron composite.
• Carbon reinforced.
• Impact resistant.
• 100% shatterproof.
• Limited lifetime warranty.
SHROUD:
• Complete shroud is OSHA approved.
• 2 piece open shroud design.
• Vinyl Coated.
• 3/16" diameter outside wrap.
• 1/4" diameter inside supports.
• Easily remove front shroud without special tools.
OPTIONS:
• Patented water misting system.
• Hold down brackets.
DRIVE TYPE:
• Direct drive, approved by engine manufacturer.
TILT POSITION:
• Infinite positions between -10° to +20°.
• Spring loaded friction lock with splined inner-locking gear.
• Rotating handle for ease of use.
• Zinc plated friction lock tilting lever.
• Adjustable friction between upper and lower frames.
SEAL DISTANCE:
•ﾠ Seals a standard doorway from 4 - 8 feet.
SUSPENSION:
• Arc design with integral suspension.
• Balanced & matched rubber feet.
ENGINE PROTECTION:
• 360° roll protection.
• Upper frame offers overhead engine protection.
WARRANTY:
• Propeller: Limited lifetime warranty.
• Frame: 5 year warranty on frame.
• Engine: 2 year factory.
FRAME:
• Upper Frame made with 3/4" 304-S stainless Steel, .065 gauge.
• Lower Frame made with 1" 304-S stainless steel, .065 gauge.
• Arc Angles.
• 50° - Front legs.
• 20° - Back legs.
• Chemical and rust resistant.
• Grade 5 or better hardware.
• Oil impregnated bushings on pivots.
• 5 year warranty.
OBSTACLE CLEARANCE:
• Lower frame offers 6.75" clearance on sides.
• Lower frame offers 5" clearance on back.
ENGINE:
• Electronic ignition w/ lifetime warranty.
• Dual element air cleaner.
• Auto oil alert.
• Decompression.
• Factory 2 year warranty.
PROPELLER:
• Built-in one-piece hub.
• Unitron composite.
• Carbon reinforced.
• Impact resistant.
• 100% shatterproof.
• Limited lifetime warranty.
SHROUD:
• Complete shroud is OSHA approved.
• 2 piece open shroud design.
• Vinyl Coated.
• 3/16" diameter outside wrap.
• 1/4" diameter inside supports.
• Easily remove front shroud without special tools.
OPTIONS:
• Patented water misting system.
• Hold down brackets.
DRIVE TYPE:
• Direct drive, approved by engine manufacturer.
TILT POSITION:
• Infinite positions between -10° to +20°.
• Spring loaded friction lock with splined inner-locking gear.
• Rotating handle for ease of use.
• Zinc plated friction lock tilting lever.
• Adjustable friction between upper and lower frames.
SEAL DISTANCE:
•ﾠ Seals a standard doorway from 4 - 8 feet.
SUSPENSION:
• Arc design with integral suspension.
• Balanced & matched rubber feet.
ENGINE PROTECTION:
• 360° roll protection.
• Upper frame offers overhead engine protection.
WARRANTY:
• Propeller: Limited lifetime warranty.
• Frame: 5 year warranty on frame.
• Engine: 2 year factory.
FRAME:
• Upper Frame made with 3/4" 304-S stainless Steel, .065 gauge.
• Lower Frame made with 1" 304-S stainless steel, .065 gauge.
• Arc Angles.
• 50° - Front legs.
• 20° - Back legs.
• Chemical and rust resistant.
• Grade 5 or better hardware.
• Oil impregnated bushings on pivots.
• 5 year warranty.
OBSTACLE CLEARANCE:
• Lower frame offers 6.75" clearance on sides.
• Lower frame offers 5" clearance on back.
| MODEL # | DESCRIPTION | LIST PRICE | PURCHASE | MODEL # | DESCRIPTION | LIST PRICE | PURCHASE | |
|
K-H2O |
Watermist Kit (You Install) |
$454.23 |
|
EMN |
Engine Mount Nut |
$0.55 |
|
|
|
F-H2O |
Watermist Kit (Factory install) |
$511.91 |
|
EMW |
Engine Mount Washer |
$0.57 |
|
|
|
H2O-R |
Watermist Ring |
$281.19 |
|
FB |
Frame Bolt |
$1.60 |
|
|
|
WPC |
Water Proof Fan Cover |
$182.31 |
|
FN |
Frame Nut |
$0.65 |
|
|
|
WL |
Pneumatic Wheels (Black) |
$169.95 |
|
FW |
Frame Washer |
$0.57 |
|
|
|
WHL-GRAY |
Gray Wheel Kit |
$148.32 |
|
F-UG |
Frame Upgrade |
$1,419.34 |
|
|
|
HNDL |
T-Handle Assembly |
$187.00 |
|
F-UG-DST |
Frame Upgrade DST Models |
$1,648.00 |
|
|
|
UF20-15 |
20" X 15' Vinyl Polyester Ducting |
$607.00 |
|
FLA |
Friction Lock Assembly |
$138.00 |
|
|
|
UF20-25 |
20" X 25' Vinyl Polyester Ducting |
$783.00 |
|
FLW |
Friction Lock Washer |
$1.60 |
|
|
|
UF22-15 |
22" X 15' Vinyl Polyester Ducting |
$607.00 |
|
FSW |
Friction Shroud Washer |
$0.55 |
|
|
|
UF22-25 |
22" X 25' Vinyl Polyester Ducting |
$783.00 |
|
K |
Knob (Black), For Tilt Adjustment |
$7.50 |
|
|
|
FS20 |
20" Full Shroud |
$250.29 |
|
MG |
Muffler Guard |
$66.00 |
|
|
|
FS22 |
22" Full Shroud |
$261.62 |
|
HAF5 |
Honda Air Filter |
$34.00 |
|
|
|
FS26 |
26" Full Shroud |
$283.25 |
|
HD |
Honda Dipstick |
$12.00 |
|
|
|
FS32 |
32" Full Shroud |
$285.31 |
|
GAS CAP |
Honda Gas Cap |
$7.00 |
|
|
|
U-18SP |
18" Unitron 2-Blade Blade Prop |
$387.00 |
|
LF |
Lower Frame |
$304.00 |
|
|
|
U-20SP |
20" Unitron 2-Blade Blade Prop |
$387.00 |
|
UF |
Upper Frame |
$1,020.00 |
|
|
|
U-22SP |
22" Unitron 2-Blade Blade Prop |
$595.00 |
|
UW |
Urethane Washer (Red) |
$1.50 |
|
|
|
U-18P4 |
18" Unitron 4-Blade Blade Prop |
$551.00 |
|
MB |
Mounting Bracket |
$99.00 |
|
|
|
U-20P4 |
20" Unitron 4-Blade Blade Prop |
$579.00 |
|
NS |
Nutsert |
$2.50 |
|
|
|
U-22P4 |
22" Unitron 4-Blade Blade Prop |
$606.00 |
|
OIB |
Oil Impregnated Bushing |
$5.25 |
|
|
|
RETRO |
Retro Kit |
$34.00 |
|
POP PIN |
Pop Pin for Adjustable Handle |
$12.15 |
|
|
|
EXH-2 |
Deluxe Exhaust Kit, 2" X 9' |
$221.00 |
|
PB |
Prop Bolt |
$2.50 |
|
|
|
EXH-3 |
Low Emissions/Clean Air Muffler Conversion |
$750.00 |
|
PN |
Prop Nut |
$0.55 |
|
|
|
BSB |
Back Shroud Bolt |
$1.60 |
|
PT |
Protective Tape (For use with wood props) |
$7.50 |
|
|
|
BSW |
Back Shroud Washer |
$0.57 |
|
RFS |
Rubber Feet Soft (For fans up to 6.5 HP) |
$14.16 |
|
|
|
CBN |
Crankshaft Bolt |
$3.15 |
|
RFH |
Rubber Feet Hard (For fans up to 8+ HP |
$14.16 |
|
|
|
CW |
Crankshaft Washer |
$0.57 |
|
SS |
Set Screw |
$0.57 |
|
|
|
EMB |
Engine Mount Bolt |
$2.73 |
|
SK |
Shear Key |
$2.58 |
|
|
|
SWN |
Shroud Wing Nut |
$2.73 |
|
| MODEL # | DESCRIPTION | LIST PRICE | PURCHASE |
|
K-H2O |
Watermist Kit (You Install) |
$441.00 |
|
|
F-H2O |
Watermist Kit (Factory install) |
$497.00 |
|
|
H2O-R |
Watermist Ring |
$273.00 |
|
|
WPC |
Water Proof Fan Cover |
$177.00 |
|
|
WL |
Pneumatic Wheels (Black) |
$165.00 |
|
|
WHL-GRAY |
Gray Wheel Kit |
$144.00 |
|
|
HNDL |
T-Handle Assembly |
$187.00 |
|
|
UF20-15 |
20" X 15' Vinyl Polyester Ducting |
$607.00 |
|
|
UF20-25 |
20" X 25' Vinyl Polyester Ducting |
$783.00 |
|
|
UF22-15 |
22" X 15' Vinyl Polyester Ducting |
$607.00 |
|
|
UF22-25 |
22" X 25' Vinyl Polyester Ducting |
$783.00 |
|
|
FS20 |
20" Full Shroud |
$243.00 |
|
|
FS22 |
22" Full Shroud |
$254.00 |
|
|
FS26 |
26" Full Shroud |
$275.00 |
|
|
FS32 |
32" Full Shroud |
$277.00 |
|
|
U-18SP |
18" Unitron 2-Blade Blade Prop |
$387.00 |
|
|
U-20SP |
20" Unitron 2-Blade Blade Prop |
$387.00 |
|
|
U-22SP |
22" Unitron 2-Blade Blade Prop |
$595.00 |
|
|
U-18P4 |
18" Unitron 4-Blade Blade Prop |
$551.00 |
|
|
U-20P4 |
20" Unitron 4-Blade Blade Prop |
$579.00 |
|
|
U-22P4 |
22" Unitron 4-Blade Blade Prop |
$606.00 |
|
|
RETRO |
Retro Kit |
$34.00 |
|
|
EXH-2 |
Deluxe Exhaust Kit, 2" X 9' |
$221.00 |
|
|
EXH-3 |
Low Emissions/Clean Air Muffler Conversion |
$750.00 |
|
|
BSB |
Back Shroud Bolt |
$1.60 |
|
|
BSW |
Back Shroud Washer |
$0.55 |
|
|
CBN |
Crankshaft Bolt |
$3.15 |
|
|
CW |
Crankshaft Washer |
$0.55 |
|
|
EMB |
Engine Mount Bolt |
$2.65 |
|
|
EMN |
Engine Mount Nut |
$0.55 |
|
|
EMW |
Engine Mount Washer |
$0.55 |
|
|
FB |
Frame Bolt |
$1.60 |
|
|
FN |
Frame Nut |
$0.65 |
|
|
FW |
Frame Washer |
$0.55 |
|
|
F-UG |
Frame Upgrade |
$1,378.00 |
|
|
F-UG-DST |
Frame Upgrade DST Models |
$1,600.00 |
|
|
FLA |
Friction Lock Assembly |
$138.00 |
|
|
FLW |
Friction Lock Washer |
$1.60 |
|
|
FSW |
Friction Shroud Washer |
$0.55 |
|
|
K |
Knob (Black), For Tilt Adjustment |
$7.50 |
|
|
MG |
Muffler Guard |
$66.00 |
|
|
HAF5 |
Honda Air Filter |
$34.00 |
|
|
HD |
Honda Dipstick |
$12.00 |
|
|
GAS CAP |
Honda Gas Cap |
$7.00 |
|
|
LF |
Lower Frame |
$304.00 |
|
|
UF |
Upper Frame |
$1,020.00 |
|
|
UW |
Urethane Washer (Red) |
$1.50 |
|
|
MB |
Mounting Bracket |
$99.00 |
|
|
NS |
Nutsert |
$2.50 |
|
|
OIB |
Oil Impregnated Bushing |
$5.25 |
|
|
POP PIN |
Pop Pin for Adjustable Handle |
$12.15 |
|
|
PB |
Prop Bolt |
$2.50 |
|
|
PN |
Prop Nut |
$0.55 |
|
|
PT |
Protective Tape (For use with wood props) |
$7.50 |
|
|
RFS |
Rubber Feet Soft (For fans up to 6.5 HP) |
$14.16 |
|
|
RFH |
Rubber Feet Hard (For fans up to 8+ HP |
$14.16 |
|
|
SS |
Set Screw |
$0.55 |
|
|
SK |
Shear Key |
$2.50 |
|
|
SWN |
Shroud Wing Nut |
$2.50 |
|